The Cisco CleanAir® Accessory allows you to connect to a Cisco CleanAir-enabled access point to perform remote spectrum analysis.
The Cisco CleanAir Accessory is an unlockable feature in Chanalyzer 5. You can either purchase Chanalyzer 5 with the Cisco CleanAir Accessory bundled in, or you can add it later.
Remote spectrum analysis from across the building or across the country
View both 2.4 and 5 GHz simultaneously (double rainbow!)
Get the access point's perspective on interference
Identify interfering devices with Cisco CleanAir®
Measure utilization on each channel
Drop the AP into SE-Connect mode, and download and open the CCF file from the WLC...
...or connect directly with a known IP address and NSI key.
If you don't already have Chanalyzer 5, click here to add Chanalyzer 5 + Report Builder + Cisco CleanAir to your cart.
If you already have Chanalyzer 5, but just need to unlock Cisco CleanAir support, click here to add the Cisco CleanAir Accessory to your cart.
Note: The Cisco CleanAir accessory will not work with Cisco's Mobility Express (ME) controller at this time